i have managed to run Kicad on OpenBSD via X forward from my FreeBSD box.

https://m.youtube.com/watch?v=t0UtkeykXCY&pp=ygUmRnJlZWJzZCBsYXB0b3AgYW5kIGRlc2t0b3Agd29ya2dyb3VwIDE%3D

But....on freebsd do u use any DE? As far as i know Plasma does not support wayland session. So how should i install hyprland then? 🤔🧐 I have KDE Plasma now with x11 session and sddm but i would try hyperland. 🤓

How is wayland on kde plasma? 🤔🙄

Hi all. Who is now on FreeBSD 14.2-Release, can you check if switching between TTY consoles via CTRL+ALT+F1 to F8 works for you? I switch, but I still have the picture from the graphical desktop, but at the same time I can enter commands into the switched console. Those. I enter my login and password blindly, I can enter commands, they are executed, but at the same time I have my last desktop picture.

I did update from 13.2 to 14.0 yestarday. I use KDE plasma and sddm. On 14.0 sddm was broken. Only tty was available but the screen was flickering....🤔 I was unable to even type login credentials....😒 I was pressing quickly randomly some buttons on my keyboard and the flickering was slowing down and then i was able to login and continue the upgrade process. But DE was still unavailable. Then i was updating to 14.2 and everything works again. 🙄😂

Hi all. Who is now on FreeBSD 14.2-Release, can you check if switching between TTY consoles via CTRL+ALT+F1 to F8 works for you? I switch, but I still have the picture from the graphical desktop, but at the same time I can enter commands into the switched console. Those. I enter my login and password blindly, I can enter commands, they are executed, but at the same time I have my last desktop picture.

thx, The reason it is impossible to switch to 14.2 is that you need to rebuild the drm-61-kmod package from the ports, because the current one is made for 14.1

thx, The reason it is impossible to switch to 14.2 is that you need to rebuild the drm-61-kmod package from the ports, because the current one is made for 14.1

I was reinstalling drm even on 14.0 using pkg-static after kernel update.

I was reinstalling drm even on 14.0 using pkg-static after kernel update.

need to rebuild the drm-61-kmod package from the ports

need to rebuild the drm-61-kmod package from the ports

pkg version is not good? I use that one on 14.2 and no issue so far.

I did update from 13.2 to 14.0 yestarday. I use KDE plasma and sddm. On 14.0 sddm was broken. Only tty was available but the screen was flickering....🤔 I was unable to even type login credentials....😒 I was pressing quickly randomly some buttons on my keyboard and the flickering was slowing down and then i was able to login and continue the upgrade process. But DE was still unavailable. Then i was updating to 14.2 and everything works again. 🙄😂

You could also clean the machine sometimes

pkg version is not good? I use that one on 14.2 and no issue so far.

impossible

You could also clean the machine sometimes

This is my sandbox machine....😏

pkg version is not good? I use that one on 14.2 and no issue so far.

https://forums.freebsd.org/threads/when-switching-the-tty-console-via-ctrl-alt-f-the-image-remains-from-the-desktop.96208/

I have decommissioned my FreeBSD box, now I can wave goodbye to this channel. Goodbye and thanks for all the fish.

Does anyone use p14s with FreeBSD? Does the sleep work?

ThinkPad P14S Core i7

Does anyone use p14s with FreeBSD? Does the sleep work?

I don't trust sleep/hibernation support on fbsd, I used a T430 for years with support until it broke it (the support, not the notebook) somewhere between 13.2 and 14.0

I don't trust sleep/hibernation support on fbsd, I used a T430 for years with support until it broke it (the support, not the notebook) somewhere between 13.2 and 14.0

to be fair, the problem is not in the suspend/hibernation part, but in the resume part, it doesn't resume

I am currently running FreeBSD on Core i17 1260P on an EVO platform. So far the PM is so good that I don’t mind sleep that much. But when its not sleeping, the fan constantly spins and spews heat. I can’t keep it in bag. I have to shutdown. I want to close the lid and move.

Same. I supports sleep. But when its wakes up, it just reboots for no obvious reason. No crash nothing. I run bhyve VMs and I don’t like reboots like this.

I am currently running FreeBSD on Core i17 1260P on an EVO platform. So far the PM is so good that I don’t mind sleep that much. But when its not sleeping, the fan constantly spins and spews heat. I can’t keep it in bag. I have to shutdown. I want to close the lid and move.

after S3 stopped work I started to use S5.

Never tried that. S4 is useless.

Never tried that. S4 is useless.

S5 it turns down the notebook, in the correct way

better than a hard reset after it got stuck in the resume process from S3

I will try.

I will try.

sudo poweroff

sudo poweroff

doas shutdown -p now

If I don't turn it off with -p, use -h or use halt, the power LED stays on on my T480 Thinkpad. I got it recently, I didn't see if it can be fixed with any configuration. halt is more practical :)

to be fair, the problem is not in the suspend/hibernation part, but in the resume part, it doesn't resume

Does it related to ZFS? 🤔

Does it related to ZFS? 🤔

I have no idea

It gets stuck in a tty and the DE doesn't come back

I can't reproduce rn

It gets stuck in a tty and the DE doesn't come back

i have the same issue with xfce on my pc

It gets stuck in a tty and the DE doesn't come back

Seems to be a graphics problem

hi guys. what rss reader use(if any) and what would be your choice?

i tested so far quiterss, liferea and rss guard.

hi guys. what rss reader use(if any) and what would be your choice?

feeder when i used to use one

Elfeed is a good one ! of course if you are using emacs

On 14.2 release virtualbox-ose does not work? 🙄🤔 I was thinking the port version is patched as shown on freshports webpage, it has got this year january patch....and the pkg version i did install it, was on August of 2023 on 13.xx Release 🤔🙄 was working with no issue... So after i did upgrade to 14.2 and updated ports tree i was removing the pkg version of virtualbox and build the ports version. But after 3 hours of building -the build was at least succesfull- virtualbox still does not work. 😒

On 14.2 release virtualbox-ose does not work? 🙄🤔 I was thinking the port version is patched as shown on freshports webpage, it has got this year january patch....and the pkg version i did install it, was on August of 2023 on 13.xx Release 🤔🙄 was working with no issue... So after i did upgrade to 14.2 and updated ports tree i was removing the pkg version of virtualbox and build the ports version. But after 3 hours of building -the build was at least succesfull- virtualbox still does not work. 😒

many ports and packages break because for some reason the ports are built for 14.1 as of now

many ports and packages break because for some reason the ports are built for 14.1 as of now

Hmmm...i see 🤔

Hmmm...i see 🤔

you can git the ports collection and compile them with make install, that's what i am doing for now for vbox

you can git the ports collection and compile them with make install, that's what i am doing for now for vbox

Ok. Let me know how did went.

Ok. Let me know how did went.

vbox is working fine

vbox is working fine

👍 on 14.2 Release?

👍 on 14.2 Release?

yeah

yeah

I was using portsnap fetch install for updating portstree not git....this might cause the issue? 🙄🤔

I was using portsnap fetch install for updating portstree not git....this might cause the issue? 🙄🤔

idk about portsnap, but you can do make reinstall clean for already installed packages and if you have the src already

portsnap still works !?

Yes It works

Yesterday used

Wow.

I am with problem into my hdmi audio with 14.2 someone else has too?

What's the prob

I am with problem into my hdmi audio with 14.2 someone else has too?

Hardware info?

Hardware info?

Beelink Mini S12 root@nuc02:~ # freebsd-version 14.2-RELEASE root@nuc02:~ # uname -a FreeBSD nuc02 14.2-RELEASE FreeBSD 14.2-RELEASE releng/14.2-n269506-c8918d6c7412 GENERIC amd64

Beelink Mini S12 root@nuc02:~ # freebsd-version 14.2-RELEASE root@nuc02:~ # uname -a FreeBSD nuc02 14.2-RELEASE FreeBSD 14.2-RELEASE releng/14.2-n269506-c8918d6c7412 GENERIC amd64

root@nuc02:~ # cat /dev/sndstat Installed devices: pcm0: <Realtek ALC897 (Rear Analog)> (play/rec) default pcm1: <Realtek ALC897 (Front Analog)> (play/rec) No devices installed from userspace.

root@nuc02:~ # cat /dev/sndstat Installed devices: pcm0: <Realtek ALC897 (Rear Analog)> (play/rec) default pcm1: <Realtek ALC897 (Front Analog)> (play/rec) No devices installed from userspace.

root@nuc02:~ # pciconf -lv | grep -i multi -B4 hdac0@pci0:0:31:3: class=0x040300 rev=0x00 hdr=0x00 vendor=0x8086 device=0x54c8 subvendor=0x8086 subdevice=0x7270 vendor = 'Intel Corporation' device = 'Alder Lake-N PCH High Definition Audio Controller' class = multimedia

root@nuc02:~ # pciconf -lv | grep -i multi -B4 hdac0@pci0:0:31:3: class=0x040300 rev=0x00 hdr=0x00 vendor=0x8086 device=0x54c8 subvendor=0x8086 subdevice=0x7270 vendor = 'Intel Corporation' device = 'Alder Lake-N PCH High Definition Audio Controller' class = multimedia

root@nuc02:~ # dmesg | grep drm drmn0: successfully loaded firmware image 'i915/adlp_dmc_ver2_16.bin' drmn0: [drm] Finished loading DMC firmware i915/adlp_dmc_ver2_16.bin (v2.16) [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 #12 0xffffffff8334c996 at drm_ioctl_kernel+0xb6 #13 0xffffffff8334cd03 at drm_ioctl+0x2b3 [drm] Got Intel graphics stolen memory base 0x7c800000, size 0x3c00000 drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io lkpi_iic0: <LinuxKPI I2C> on drmn0 lkpi_iic1: <LinuxKPI I2C> on drmn0 lkpi_iic2: <LinuxKPI I2C> on drmn0 lkpi_iic3: <LinuxKPI I2C> on drmn0 lkpi_iic4: <LinuxKPI I2C> on drmn0 lkpi_iic5: <LinuxKPI I2C> on drmn0 lkpi_iic6: <LinuxKPI I2C> on drmn0 lkpi_iic7: <LinuxKPI I2C> on drmn0 lkpi_iic8: <LinuxKPI I2C> on drmn0 drmn0: successfully loaded firmware image 'i915/adlp_dmc_ver2_16.bin' drmn0: [drm] Finished loading DMC firmware i915/adlp_dmc_ver2_16.bin (v2.16) [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0

Hardware info?

I'm new with FreeBSD, I need a direction to follow about the problem and I can't see any problem...

There is no hdmi output on sndstat output. Perhaps adding to /boot/loader.conf compat.linuxkpi.i915_disable_power_well="0" And full reboot, you can see the hdmi sound output

There is no hdmi output on sndstat output. Perhaps adding to /boot/loader.conf compat.linuxkpi.i915_disable_power_well="0" And full reboot, you can see the hdmi sound output

no HDMI devices yet after reboot

Kldload compat .... And see the result whit kldstat

portsnap still works !?

Will work until 2026 April 30th

Kldload compat .... And see the result whit kldstat

Kldstat loaded several kernel objects, I can shared here

Will work until 2026 April 30th

After that, we must use the sh*** git

After that, we must use the sh*** git

😏

hi. im freebsd user

portsnap still works !?

yeah, but not for too long, sadly

I liked a lot synth its been a while since I havent use that to build packages !

I only use the pkg binaries on FreeBSD

I only use the pkg binaries on FreeBSD

gotta be nice for you to use stuff that doesn't break on updates

I've been doing sources for ages ! once in a while there are a few problems but nothing beyond that

usually prblems get solved quite fast

the onlty complain I still have is freebsd not supporting my sound blasters ! Im using ossv4

the onlty complain I still have is freebsd not supporting my sound blasters ! Im using ossv4

Do you also use a Gentoo?

Do you also use a Gentoo?

yes of course ! this machine is actually running it

Gentoo has renome that is very difficult. How much time is it have to compiling the upgrades?

as in freebsd compiling sources will depend on features added and of course the machine you preted to use it !

I have a iMac g3 running openbsd and a PBX runnining in a PIV with freebsd ! if I intend to do sources there I think unix end of times will catch up before is done