Also, updating your driver - the native kernel driver should work good enough

I uninstalled native driver - it tend to crash all the time. Instead, I used one from GitHub but it was abandoned and finally removed.

I uninstalled native driver - it tend to crash all the time. Instead, I used one from GitHub but it was abandoned and finally removed.

...Just update your kernel.

Dont disable native kernel drivers that are under active development and will be better in future versions

Ok, another question. Who uses the same stick (8192CU)? Is it ok now with Fedora and latest kernel?

Ok, another question. Who uses the same stick (8192CU)? Is it ok now with Fedora and latest kernel?

It’s been ages since I used one of those. I don’t know how do they work now.

Quoting Phoronix: In Kubuntu "They also replaced Amarok with the Cantata Qt5 music player"

I'm pretty sad to see how Amarok lost its former glory with rewrite to 2.0

Quoting Phoronix: In Kubuntu "They also replaced Amarok with the Cantata Qt5 music player"

I highly doubt that.

Unless you have mpd running Cantata is of little to no use for you. And i dont think kubuntu will deploy mpd systemwide.

yeah, just looked at what Cantata is and I am also pretty convinced that this is not true

I highly doubt that.

https://wiki.ubuntu.com/ArtfulAardvark/Beta2/Kubuntu

"Cantata Qt5 music player replaces the unmaintained KDE4 based Amarok as our default for this beta. Please test this change. This is a Music Player Daemon frontend, so configuration & usage may be unfamiliar. Most users will want to select the 'basic single user setup' in the first run wizard. "

Unless they really did great job with mpd configuration, I think giving that to causal users will be a trainwreck

:( dracut-pre-udev [331]: rpcbind: /run/rpcbind/rpcbind.lock: No such file or directory dracut-pre-udev [331]: rpc.idmapd: conf_reinit: open ("(null)", 0_RDONLY) failed dracut-pre-udev [331]: rpc.idmapd: conf_reinit: open ("(null)", 0_RDONLY) failed

can't boot the installer, ASUS X553M

if I remove quiet from kernel line, last message is r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control but that seems to be coming from the ethernet driver so I'm not sure why boot process halts

I’d swear you were already in this group Alice ?

if I remove quiet from kernel line, last message is r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control but that seems to be coming from the ethernet driver so I'm not sure why boot process halts

Weird. What kind of hardware is? I’m not familiar with Asus.

Weird. What kind of hardware is? I’m not familiar with Asus.

Just a normal Core M with built-in GPU. Nothin that should cause problems.

Uhm. I assume you’re trying to install Fedora Workstation. Am I right?

Did you try another distro or Spin? Just to be sure that it’s not a problem of Gnome Shell or Fedora.

can't boot the installer, ASUS X553M

Try acpi=off

:( dracut-pre-udev [331]: rpcbind: /run/rpcbind/rpcbind.lock: No such file or directory dracut-pre-udev [331]: rpc.idmapd: conf_reinit: open ("(null)", 0_RDONLY) failed dracut-pre-udev [331]: rpc.idmapd: conf_reinit: open ("(null)", 0_RDONLY) failed

That sounds like a broken iso - to be sure write the image on the boot medium again.

Just a normal Core M with built-in GPU. Nothin that should cause problems.

Core M cause a fuckton of problems because they are usually in cheap 32bit efi tablets with crappy bioses and weird exotic hardware.

For which support will only improve in F27.

Tobias has a new doggo

Indeed

i also changed my bio sometime back

I bet you fucking didn't

you're trying to double-rickroll me

No i'm not ^^

That sounds like a broken iso - to be sure write the image on the boot medium again.

It's a stick I used to boot lots of machines already – just to make sure I just flashed F26 on it again.

Still same dracut error.

I also tried legacy BIOS mode – no luck.

you're trying to double-rickroll me

Convinced?

Whoever has the booting issue what is the issue with booting and dracut ?

that rpcbind.lock IS NORMAL

having a rpcbind on a iso would imply a custom and agruably insecure setup

Well, those are the last messages.

Booting halts after that message.

that would be for like a ipxe boot or tftp booted install

if I remove quiet from kernel line, last message is r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control but that seems to be coming from the ethernet driver so I'm not sure why boot process halts

and it fails to give a prompt or gui?

reboot but ADD the following WITHOUT the qoutes: "debug=1 plymouth.disable=1 kdump_addon=on"

to grub kernel line

that would be for like a ipxe boot or tftp booted install

Nah, it comed on usbboot too

I meant use of the rpcbind.lock

not the failure

Love that Siberian Husky @Wolfshappen ! Is the dog holding a leaf for real or is it Photoshop/Gimp?

Love that Siberian Husky @Wolfshappen ! Is the dog holding a leaf for real or is it Photoshop/Gimp?

Hes actually holding it in an unbeleafably cute way

Someone else found it on reddit https://www.reddit.com/r/aww/comments/7328qw/unbeleafably_photogenic_doggo/

Hes actually holding it in an unbeleafably cute way

Awww ??

reboot but ADD the following WITHOUT the qoutes: "debug=1 plymouth.disable=1 kdump_addon=on"

same thing. it stops booting at "can't disable ASPM", a message from the ethernet driver.

try pcie_aspm=0 at kernel grub line

Alice ^^

I am too getting lots of errors installing fedora 26 from dvd But 24 is not giving any error I will send errors tomorrow

Niteen is it late in the evening for you ? or is there something like work causing delay

I am too getting lots of errors installing fedora 26 from dvd But 24 is not giving any error I will send errors tomorrow

Check intergity of installation LiveCD.

ERROR: S client not available

try pcie_aspm=0 at kernel grub line

same result

pcie_aspm=off

maybe it doesn't like the 0|1 switch

pcie_aspm=off

no, hangs at the ethernet thing =\

same result

acpi=off

acpi=off

still hangs at the ethernet thing. though the message is 0000:03:00.2: PCI->APIC IRQ transform: INT A -> IRQ 19

comes from the ethernet driver though, still

try "debug=1 pcie_aspm=off no_localapic"

https://fedoramagazine.org/fedora-classroom-session-git-101/

??

Niteen is it late in the evening for you ? or is there something like work causing delay

Its festival time and everone is dancing and I am gonna join them

lol

try "debug=1 pcie_aspm=off no_localapic"

now it halts at r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

eth should not be a show stopper unless using a netinstaller

eth should not be a show stopper unless using a netinstaller

ikr, hence my confusion

eth should not be a show stopper unless using a netinstaller

speaking of netinstaller, what is the installation like?

Gnome? Cinnamon? KDE? Other...?

Already fixed

o/

o/

Just here to lurk and to learn

Already fixed

Oh. Okay.

what is the best/easy way to connect to online windows PC from my Fedora PC ?

something similair to teamviewer, i mean .

what is the best/easy way to connect to online windows PC from my Fedora PC ?

VNC

what is the best/easy way to connect to online windows PC from my Fedora PC ?

Eternalblue xd

I'm using rdp at work

Bit it's on a private network

I'm using rdp at work

the windows machine not on the same network that i am on it ._.

Fedora tweets Get tweets from: - Fedora Project (fedora) - Fedora Planet (fedora_planet) - FedoraCommunityBlog (fedoracommunity) https://t.me/fedoratweets