13.0 is out but why there's no svn/base/releng/13 as of yet ?

wanna perform source upgrade but this seems to be impossible atm

https://svnweb.freebsd.org/base/releng/

even no stable/13

oh.

jeez.

thanks.

Check this message.

:charset=it_IT.UTF-8:\ :lang=it_IT.UTF-8:\

Check this message.

this way works, thank you very much

C , this handbook page may be of help. https://docs.freebsd.org/en/books/handbook/geom-glabel.html

NetBSD does, OpenBSD probably too.

yee , tried both

failed

no bsd for me as of now ig

Greetings y'all. Long time multiple OS user here since the early 80s. Mostly run Linux these days - Solus and PCLinuxOS. Have been testing out FreeBSD 13.0 on a laptop, and enjoying the OS so much that I ordered "Absolute FreeBSD, 3rd Edition: The Complete Guide to FreeBSD" by Michael W. Lucas.

Greetings y'all. Long time multiple OS user here since the early 80s. Mostly run Linux these days - Solus and PCLinuxOS. Have been testing out FreeBSD 13.0 on a laptop, and enjoying the OS so much that I ordered "Absolute FreeBSD, 3rd Edition: The Complete Guide to FreeBSD" by Michael W. Lucas.

Welcome

Welcome

Thanks!

1 freebsd 2 just follow installation encryption option 3 zfs 4 chroot/jail maybe

For FS you can either use UFS or ZFS

1. FreeBSD and use the desktop-installer script (https://wiki.freebsd.org/unitrunker/desktop-installer). 2. GELI on ZFS. Provided you select ZFS during installation, the options will be available. 3. For desktop, I'd recommend ZFS, as it's more resilient in the event of power failure or bad system shutdown. 4. There are hardening options as part of the install. I generally just tick all the options. Then, follow best practices as far as services you enable and such.

ali masoomi Having used both, I've found GELI to be somewhat comparable to LUKS. I did find I had more control post install to modify GELI (such as the passphrase).

ali masoomi I refer to the OpenBSD (works fine under FreeBSD) section here to harden SSH: https://www.sshaudit.com/hardening_guides.html

ali masoomi And the desktop-installer I mentioned above will optionally get you started with a firewall configuration too.

hello all, i wanted to know if it is possible to install the brave browser on fbsd...

is that possible? is it available ?

That's a complex question.

https://community.brave.com/t/building-on-freebsd/113186/6

They are not against it, but their upstream is chromium, which is quite hostile to BSDs. Generally this is not an easy task to perform even once, and even harder to maintain.

They are not against it, but their upstream is chromium, which is quite hostile to BSDs. Generally this is not an easy task to perform even once, and even harder to maintain.

Yea it’s tricky

funny thing, there's no ipsec support in 13th GENERIC. again.

missing the option IPSEC, however IPSEC_SUPPORT is in place.

Who can help me? How to fix this

welll..........

you're screwed

so every snapshot is dead

and it cant read a zpool

Looks like missing disks. Try booting from USB image and checking disk state/importing zpool.

na

could be nothing

1) old messed loader

2) too big bootable slice and zfs bootblocks are gone above 2nd TB

3) so-called "shadow pool" - remnants of the old zpool that are read by zfs-enabled loader and that it cannot understand (since it's probably UNAVAIL)

fnd only the 4rd) , with 3% probability - the pool is really dead

boot from rescue/live FreeBSD CD and check the pool - I'm sure it will be okay

this thing is happening all the time

thats why to minimize it's probability it's worth to create slices for the rpool being small and around the start of the disk

so in case of the shadow pool you'll need to clean it (potentially destructive operation, if you're not experienced enough) and in case of the boot blocks gone over the 2nd TB you'll need to create the separate boot pool

(or boot from the usb, haha)

Happened to me once, had to load zpool.cache from loader to proceed. After tracing found out that not all previous zpool uberblocks were overwritten at the start of swap partition.

happened to me like 5 or 6 times for the last 10 years

for different reasons mentioned

the thing is that gptzfsboot or it's UEFI derivative is small and just isn't fullfledged

so it really cannot handle complicated situations

thus it acts like "I give up, the pool is dead" in every situation it doesn't understand

just don't act yourself like it's really dead 'cause you can really make it this way :)

so every snapshot is dead

snapshots are for file recovery, not for pool recovery, dear

Ur right

Hi, can someone help me with the exports config of my nfs server? I tried to limit a share to a specific ip but I can still mount that Folder on any other machine on the network. I tried to do it like this: I want to limit the access to the directory /nas/Torrents to the ip address 192.168.2.247 Somehow that does not work like that. What am I doing wrong?

-network 192.168.2/24

Is it possible to watch Netflix on fbsd?

Cause I think it does not work on Firefox but only chrome/chromium

DRM

Hello! I installed FreeBSD time ago for curiosity and now im again with Gentoo, my main distro. I have a SSD and use some configs to build in RAM like tmpfs or now ZRAM. I saw some threads in forums talking about poudriere or someting like that. Someone can guide me for the correct place? Can I build all in a basic installation? Im trying find answers to make a installation like Gentoo using RAM for build and optimizations to get a final package! Thanks!

I'm not fluent with poudriere, but I guess you can do the same with synth.

It's really easy on first run and works pretty nice.

Is it possible to watch Netflix on fbsd?

https://github.com/mrclksr/linux-browser-installer

DRM

and ?

emulation, Linux, or Wine.

what's TPM ?

emulation, Linux, or Wine.

wine is not an emulator dude

dude there are like 30000 results

meaning different stuff

wine is not an emulator dude

Sorry, forgot my Oxford comma…

you are in google filter bubble dude

karakalpakstan

@Jharked999 now... tell me what do you like about karakalpakstan, since you said "nice" ?

wrong...

is an independent region of "uzbekistan"

which is an ex-USSR country

@Jharked999 where are you from?